ITM Connect · Hardware Collection
Hardware ITM can provide as part of your monitoring application
Every ITM Connect application is built from the same field-proven parts: wireless Edge Nodes on a secure 2.4 GHz mesh, the Binsfeld TT50 torque collar for rotating shafts, an IX15 gateway with Zigbee routers to carry the data, NI CompactRIO / CompactDAQ with C Series modules where wired high-rate channels are needed, and ITM Compute Pro, Panel or Rail platforms running ITM Connect and iTestSystem on site.
8Wireless Edge Nodes
1Torque telemetry system
2Gateway & mesh routers
5Wired DAQ controllers & chassis
6C Series I/O modules
5Edge compute platforms
Show
At a glance
27 hardware options, one platform. Pick the endpoints the measurement needs; the gateway, routers and compute layer are common to every application. Click any item to jump to its card.
View the 27-item specification summary
| Hardware | Model / part | Role | Spec snapshot | Typical app briefs |
|---|---|---|---|---|
| 1. Wireless Strain Node | DSGT / SSGT | Structural load / force on gates, hoists, trunnions, frames — no cable pulls | 24-bit ADC · 20x front-end + 1x–128x gain · 1 sample/day to 10 S/s | Spillway & Gate Monitoring; structural load apps |
| 2. Wireless Vibration Node – BA | BA | Retrofit rotating-machinery health (motors, gearboxes, pumps, fans) | RMS in 4 configurable bands · configurable measure/report intervals | Agitator, chip meter, scraper drive trains; general machine health |
| 3. Wireless Thermocouple Node | TC Node | Bearing, gearbox, motor and process temperature trending | ±0.0625 °C resolution · ±2 °C typical accuracy · integrated cold-junction compensation | All torque/driveline apps (bearing temp); recovery boiler |
| 4. Wireless IR Temperature Node | IR Node | Temperature of moving, rotating or unreachable surfaces (shafts, couplings, rolls) | –70 to +380 °C object range · ±0.5 °C accuracy · 0.02 °C resolution | Marine / workboat driveline; rolling mill; agitator |
| 5. Wireless Vibration Node – SFD | SFD | Quantifies steam-jet energy transfer to boiler tubes (fouling detection) | ~8 kHz sampling · 8 Hz on-board processing · patented (US 9,927,231) | Recovery Boiler Fouling & Sootblower Health |
| 6. Wireless Thermocouple Node – HALT | HALT | Hopper ash-level inference and pluggage detection | ±0.0625 °C resolution · ~0.21 mA sleep · hardened packaging for fly-ash hopper service | Boiler / precipitator hopper monitoring |
| 7. Wireless Sootblower Lance Temperature Node | Lance IR Node | Detects anomalies preceding lance failure and steam waste | –70 to +380 °C · 0.02 °C resolution | Recovery Boiler Fouling & Sootblower Health |
| 8. Wireless Machine Health Node | MH Node | Factory asset condition monitoring with a single mount point | Dual-signature (vibration + temperature) in one device · IR 0.02 °C resolution · ~0.04 mA sleep | Chip meter, agitator, scraper, mill drive trains |
| 9. TT50: ITM Connect Solution (Binsfeld TorqueTrak 50) | TX50 transmitter + RX50 receiver | Primary torque / power / load measurement on rotating shafts | Clamp-on modular chain-link collar, no shaft machining or disassembly · 24-bit ADC · up to 2,400 S/s aggregate | Chip Meter; Agitator; Digester Scraper; Rolling Mill; Marine Propulsion; Workboat Driveline |
| 10. Wireless IoT Gateway & Cellular Router | Digi IX15 | Mesh coordinator / gateway bridging wireless nodes to ITM Compute, plant network or cloud | –40 to +74 °C · 157 x 106 x 35 mm, DIN-rail mountable · Python 3 programmable | Any app using wireless nodes |
| 11. ITM Zigbee Router | ITM Zigbee Router (mains / field powered) | Mesh backbone between distant nodes and the IX15 gateway | Extends mesh range and hop count · adds redundant paths around steel structures and obstructions · quantity set by site RF survey | Spillway & Gate (long gate lines); large mills and boilers |
| 12. NI CompactRIO Controller Chassis | cRIO-9045 (8-slot); cRIO-9043 (4-slot) alternate | Continuous high-rate wired acquisition and on-board control where duty-cycled wireless is not enough | 1.30 GHz dual-core Intel Atom · Kintex-7 70T FPGA · 2 GB RAM / 4 GB storage | Rolling Mill; Marine Propulsion; high-speed torque / vibration apps |
| 13. ITM Compute (Panel / Rail / Pro) | Industrial PC, touch-panel PC or cRIO-9045 based | On-site compute and analytics layer for every ITM Connect application | Browser-based ITM Connect app for node, input, sampling and alarm configuration · automated analytics and KPI extraction · Grafana dashboards | All app briefs |
| 14. NI CompactRIO Controller – 8-slot, quad-core | cRIO-9047 | Highest-performance wired DAQ controller — multi-stand or multi-shaft sites needing FPGA-timed acquisition and extended temperature | 1.60 GHz quad-core Intel Atom · Kintex-7 70T FPGA · 4 GB DRAM / 4 GB storage | Rolling Mill (multi-stand); Marine Propulsion; Hydro Turbine; SAG Mill |
| 15. NI CompactRIO Controller – 4-slot, value | cRIO-9055 | Lower-cost wired DAQ controller for 1–4 module installs (one collar + one vibration/strain module) | 1.33 GHz dual-core Intel Atom · Artix-7 100T FPGA · 2 GB DRAM / 4 GB storage | Chip Meter / Scraper / Agitator when wired DAQ is needed; Workboat |
| 16. NI CompactRIO Controller – 8-slot, value | cRIO-9058 | Value 8-slot controller for many-channel wired installs where cRIO-9047 CPU headroom is not required | 1.33 GHz dual-core Intel Atom · Artix-7 100T FPGA · 2 GB DRAM / 4 GB storage | Spillway & Gate (wired option); Steam Header / Piping Stress; Hanger Rod |
| 17. NI CompactDAQ Ethernet Chassis – 8-slot | cDAQ-9189 | Remote / distributed I/O drop — puts C Series modules near the machine and streams over Ethernet to the compute node | Chassis only — requires a host running iTestSystem (cRIO or POC-700) · network-synchronized timing over TSN · –40 to +70 °C | Spillway & Gate (per-pier drops); Rolling Mill (per-stand drops); Steam Header; Reactor Skin |
| 18. Bridge / Strain Input Module – 4 ch | NI-9237 | Wired strain-gauge and load-cell acquisition where the wireless strain node duty cycle is too slow | 24-bit · 50 kS/s/ch simultaneous · 60 VDC ch-to-earth isolation, 1,000 Vrms transient | Spillway & Gate (wired arms); Hanger Rod deposit mass; Steam Header; Hydro Turbine |
| 19. Quarter-Bridge Strain Input Module – 8 ch | NI-9236 | High channel-count structural strain mapping (many gauges per chassis) on gates, hanger rods, piping and vessel shells | 24-bit · 10 kS/s/ch simultaneous · 60 VDC ch-to-earth isolation, 1,000 Vrms transient | Spillway & Gate; Hanger Rod; Steam Header / Piping Stress; Reactor Skin |
| 20. Sound & Vibration Input Module – 4 ch, 51.2 kS/s | NI-9234 | Wired high-rate vibration / order analysis on gearboxes, bearings and mill drives | 24-bit, 97 dBFS dynamic range · 51.2 kS/s/ch simultaneous · software AC/DC coupling | Rolling Mill; Marine Propulsion (Phase 2); SAG Mill; Lime Kiln drive; Chip Meter order analysis |
| 21. Sound & Vibration Input Module – 3 ch, 12.8 kS/s | NI-9230 | Economy vibration / proximity-probe input for low-speed machinery and keyphasor / tach channels | 24-bit · 12.8 kS/s/ch simultaneous · AC/DC coupling | Agitator; Digester Scraper; Hydro Turbine (low-speed shafts); Lime Kiln |
| 22. Sound & Vibration Input Module – 3 ch, 102.4 kS/s | NI-9232 | Highest-bandwidth vibration input for gear-mesh and bearing-defect frequencies on high-speed drives | 24-bit · 102.4 kS/s/ch simultaneous · AC/DC coupling | Rolling Mill; Marine Propulsion; SAG Mill |
| 23. Current Input Module – 16 ch, ±20 mA | NI-9208 | Brings plant 4–20 mA context signals (hoist pressure, reservoir level, gate position, motor current, flow) into the same time base as torque / strain | 24-bit · 500 S/s aggregate · high-resolution mode with 50/60 Hz rejection | Spillway & Gate; Rolling Mill (motor current); CFB Bed Inventory; Fired Heater; Steam Header |
| 24. ITM Compute Pro – ultra-compact fanless x86 PC | Neousys POC-700 (POC-712 Atom x7425E / POC-715 Core i3-N305) | Windows/x86 edge compute that runs the full iTestSystem analytics stack and hosts cDAQ chassis — the non-cRIO route to wired DAQ | Intel Atom x7425E (4C, 12 W) or Core i3-N305 (8C, 15 W) · up to 16 GB DDR5 · M.2 2280 NVMe | Rolling Mill; Spillway & Gate; any brief with cDAQ drops or multiple RX50s |
| 25. ITM Compute Panel – 10.1" industrial HMI (Raspberry Pi CM5) | EDATEC ED-HMI3120-101C-10832-4US-S | Operator-facing panel compute: local torque / load display and ITM Connect configuration at the machine | Broadcom BCM2712 quad-core Cortex-A76 @ 2.4 GHz (CM5) · 8 GB LPDDR4 / 32 GB eMMC (-10832) · 10.1" 1280×800 capacitive touch, 400 cd/m², IP65 front | Chip Meter; Agitator; Scraper; Workboat (wheelhouse display) |
| 26. ITM Compute Rail – DIN-rail industrial PC (Raspberry Pi CM5) | EDATEC ED-IPC3632 | Headless cabinet-mount compute for single-machine ITM Connect installs with discrete I/O (proximity switch, alarm relay) | Broadcom BCM2712 quad-core Cortex-A76 @ 2.4 GHz (CM5) · 2–16 GB LPDDR4 · 16–64 GB eMMC + µSD + optional M.2 NVMe | Chip Meter; Agitator (blade ID prox switch); Scraper; Lime Kiln |
| 27. ITM Compute Rail – PLC-grade industrial Raspberry Pi | Revolution Pi RevPi Connect 5 | Control-cabinet edge node where PLC-standard certification and modular DIO/AIO expansion matter | Raspberry Pi CM5 quad-core Cortex-A76 @ 2.4 GHz · 4 or 8 GB LPDDR4X · 32 GB eMMC | Spillway & Gate (gatehouse); Hydro Turbine; Lime Kiln; general ITM Connect Rail option |
Wireless Sensor Nodes
General-purpose endpoints on the ITM 2.4 GHz IEEE 802.15.4 mesh.
Item 1
Model DSGT / SSGT · ITM · spec source ↗
Structural load / force on gates, hoists, trunnions, frames — no cable pulls
- Measures
- Strain (quarter / half / full bridge) + temperature
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery or field-cable powered
- Specs
- 24-bit ADC; 20x front-end + 1x–128x gain; 1 sample/day to 10 S/s; field-calibration support
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge Solutions
App briefsSpillway & Gate Monitoring; structural load apps
Item 2
Model BA · ITM · spec source ↗
Retrofit rotating-machinery health (motors, gearboxes, pumps, fans)
- Measures
- 3-axis vibration (RMS, 4 configurable frequency bands)
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery powered
- Specs
- RMS in 4 configurable bands; configurable measure/report intervals
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge SolutionsAlso factory asset monitoring
App briefsAgitator, chip meter, scraper drive trains; general machine health
Item 3
Model TC Node · ITM · spec source ↗
Bearing, gearbox, motor and process temperature trending
- Measures
- Contact temperature, thermocouple types K, J, T, E, N, R, S, B
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery powered (multi-year validated life)
- Specs
- ±0.0625 °C resolution; ±2 °C typical accuracy; integrated cold-junction compensation; ~6.9 mA active / ~0.21 mA sleep
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge SolutionsAlso general process monitoring
App briefsAll torque/driveline apps (bearing temp); recovery boiler
Item 4
Model IR Node · ITM · spec source ↗
Temperature of moving, rotating or unreachable surfaces (shafts, couplings, rolls)
- Measures
- Non-contact infrared surface temperature
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery powered
- Specs
- –70 to +380 °C object range; ±0.5 °C accuracy; 0.02 °C resolution; ~51.9 mA active / ~0.04 mA sleep
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge SolutionsHotspot & process temperature monitoring — no dedicated packaged solution yet
App briefsMarine / workboat driveline; rolling mill; agitator
Packaged Wireless Nodes
Purpose-built variants for boiler and factory environments.
Item 5
Model SFD · ITM · spec source ↗
Quantifies steam-jet energy transfer to boiler tubes (fouling detection)
- Measures
- Triaxial vibration, interrupt-triggered (±15 / ±30 / ±60 g)
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery powered
- Specs
- ~8 kHz sampling; 8 Hz on-board processing; patented (US 9,927,231); auto-captures sootblower passes
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge SolutionsExclusive to SFD
App briefsRecovery Boiler Fouling & Sootblower Health
Item 6
Model HALT · ITM · spec source ↗
Hopper ash-level inference and pluggage detection
- Measures
- Contact temperature (thermocouple types K–B), multi-elevation arrays
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery powered
- Specs
- ±0.0625 °C resolution; ~0.21 mA sleep; hardened packaging for fly-ash hopper service; retrofits on running units
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge Solutions
App briefsBoiler / precipitator hopper monitoring
Item 7
Model Lance IR Node · ITM · spec source ↗
Detects anomalies preceding lance failure and steam waste
- Measures
- Non-contact infrared temperature of moving lance
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery powered, low-power sleep
- Specs
- –70 to +380 °C; 0.02 °C resolution
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge SolutionsBoiler suite expansion
App briefsRecovery Boiler Fouling & Sootblower Health
Item 8
Model MH Node · ITM · spec source ↗
Factory asset condition monitoring with a single mount point
- Measures
- Triaxial vibration (±15 / ±30 / ±60 g, 16-bit, banded) + IR temperature
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee)
- Power
- Battery powered
- Specs
- Dual-signature (vibration + temperature) in one device; IR 0.02 °C resolution; ~0.04 mA sleep
Works with
RequiresIX15 Gateway
OptionalITM Zigbee Router
Edge SolutionsFactory asset condition monitoring
App briefsChip meter, agitator, scraper, mill drive trains
Torque Telemetry
Strain-based shaft torque on a rotating shaft, delivered as a configured ITM Connect solution.
Item 9
Model TX50 transmitter + RX50 receiver · Binsfeld Engineering (sensor) / ITM (integration) · spec source ↗
Primary torque / power / load measurement on rotating shafts
- Measures
- Shaft torque (strain-gauge collar), RPM (built-in gyro), calculated shaft power
- Connect
- BLE from TX50 collar to RX50 receiver; RX50 outputs Modbus RTU to ITM Compute / cRIO
- Power
- TX50: Li-SOCl2 battery, ~1 year life; RX50: 9–36 VDC, ~2 W typical
- Specs
- Clamp-on modular chain-link collar, no shaft machining or disassembly; 24-bit ADC; up to 2,400 S/s aggregate; TX50 IP66, RX50 IP68; delivered with ITM Connect configuration app and iTestSystem automated torque analytics (KPIs, MQTT to cloud)
Works with
Needs one ofITM Compute, ITM Compute Pro, ITM Compute Panel, ITM Compute Rail, ITM Compute Rail, cRIO-9045, cRIO-9047
Edge Solutions
App briefsChip Meter; Agitator; Digester Scraper; Rolling Mill; Marine Propulsion; Workboat Driveline
Gateway & Network
Carries the mesh to ITM Compute, the plant network or the cloud.
Item 10
Model Digi IX15 · Digi International · spec source ↗
Mesh coordinator / gateway bridging wireless nodes to ITM Compute, plant network or cloud
- Measures
- Aggregates ITM Zigbee / 802.15.4 sensor mesh (Digi XBee 3 PRO radio)
- Connect
- XBee 3 (Zigbee, 802.15.4, DigiMesh, BLE); 4G LTE Cat 4 cellular; 10/100 Ethernet RJ45
- Power
- 9–30 VDC, 1 A
- Specs
- –40 to +74 °C; 157 x 106 x 35 mm, DIN-rail mountable; Python 3 programmable; Digi Remote Manager; Class 1 Div 2 hazardous-location rated
Works with
Needs one ofITM Compute, ITM Compute Pro, ITM Compute Panel, ITM Compute Rail, ITM Compute Rail
Edge SolutionsConnectivity layer for every wireless packaged solution
App briefsAny app using wireless nodes
Item 11
Model ITM Zigbee Router (mains / field powered) · ITM · spec source ↗
Mesh backbone between distant nodes and the IX15 gateway
- Measures
- None (network repeater / router node)
- Connect
- Wireless mesh, 2.4 GHz IEEE 802.15.4 (Zigbee) router
- Power
- Mains or field-cable powered (always-on router)
- Specs
- Extends mesh range and hop count; adds redundant paths around steel structures and obstructions; quantity set by site RF survey
Works with
RequiresIX15 Gateway
Edge SolutionsMesh backbone for every wireless packaged solution
App briefsSpillway & Gate (long gate lines); large mills and boilers
Wired DAQ Controllers & Chassis
NI CompactRIO controllers and CompactDAQ chassis for continuous high-rate wired acquisition.
Item 12
Model cRIO-9045 (8-slot); cRIO-9043 (4-slot) alternate · NI (Emerson) · spec source ↗
Continuous high-rate wired acquisition and on-board control where duty-cycled wireless is not enough
- Measures
- C Series modules: bridge/strain (NI-9237), IEPE vibration (NI-9234), thermocouple (NI-9213), analog voltage/current, digital I/O
- Connect
- 2x Gigabit Ethernet (TSN); USB; RS-232/485 serial (Modbus RTU from RX50)
- Power
- 9–30 VDC field power
- Specs
- 1.30 GHz dual-core Intel Atom; Kintex-7 70T FPGA; 2 GB RAM / 4 GB storage; –20 to +55 °C; NI Linux Real-Time; runs iTestSystem / ITM Connect edge software
Edge SolutionsITM industrial controller with embedded iTestSystem
App briefsRolling Mill; Marine Propulsion; high-speed torque / vibration apps
Item 14
Model cRIO-9047 · NI (Emerson) · spec source ↗
Highest-performance wired DAQ controller — multi-stand or multi-shaft sites needing FPGA-timed acquisition and extended temperature
- Measures
- C Series modules (8 slots): NI-9237 / 9236 bridge, NI-9234 / 9230 / 9232 IEPE, NI-9208 current, thermocouple, DIO
- Connect
- 2x Gigabit Ethernet (TSN); RS-232 + RS-485 serial (Modbus RTU from RX50); USB 3.1 host + USB 2.0 device; SD slot
- Power
- 9–30 VDC field power
- Specs
- 1.60 GHz quad-core Intel Atom; Kintex-7 70T FPGA; 4 GB DRAM / 4 GB storage; –40 to +70 °C; NI Linux Real-Time; NI-DAQmx support; runs iTestSystem / ITM Connect edge software
Edge SolutionsWired acquisition option within the Edge Platform
App briefsRolling Mill (multi-stand); Marine Propulsion; Hydro Turbine; SAG Mill
Item 15
Model cRIO-9055 · NI (Emerson) · spec source ↗
Lower-cost wired DAQ controller for 1–4 module installs (one collar + one vibration/strain module)
- Measures
- C Series modules (4 slots)
- Connect
- 2x Gigabit Ethernet (TSN); USB 3.1 host + USB 2.0 device; trigger line; µSD slot (no on-board serial — RX50 Modbus RTU via USB/Ethernet serial adapter or NI-987x module)
- Power
- 9–30 VDC field power
- Specs
- 1.33 GHz dual-core Intel Atom; Artix-7 100T FPGA; 2 GB DRAM / 4 GB storage; –40 to +70 °C; NI Linux Real-Time
Edge SolutionsWired acquisition option within the Edge Platform
App briefsChip Meter / Scraper / Agitator when wired DAQ is needed; Workboat
Item 16
Model cRIO-9058 · NI (Emerson) · spec source ↗
Value 8-slot controller for many-channel wired installs where cRIO-9047 CPU headroom is not required
- Measures
- C Series modules (8 slots)
- Connect
- 2x Gigabit Ethernet (TSN); USB 3.1 host + USB 2.0 device; trigger line; µSD slot (no on-board serial — RX50 Modbus RTU via USB/Ethernet serial adapter or NI-987x module)
- Power
- 9–30 VDC field power
- Specs
- 1.33 GHz dual-core Intel Atom; Artix-7 100T FPGA; 2 GB DRAM / 4 GB storage; –40 to +70 °C; NI Linux Real-Time
Edge SolutionsWired acquisition option within the Edge Platform
App briefsSpillway & Gate (wired option); Steam Header / Piping Stress; Hanger Rod
Item 17
Model cDAQ-9189 · NI (Emerson) · spec source ↗
Remote / distributed I/O drop — puts C Series modules near the machine and streams over Ethernet to the compute node
- Measures
- C Series modules (8 slots); 4x 32-bit counter/timers via hardware-timed digital modules
- Connect
- 2-port TSN-enabled Gigabit Ethernet with integrated switch (daisy-chain chassis); PFI trigger lines; no on-board processor — streams to a host
- Power
- 12 V, 2 A (9–30 VDC field supply typical)
- Specs
- Chassis only — requires a host running iTestSystem (cRIO or POC-700); network-synchronized timing over TSN; –40 to +70 °C; conformal-coating option (785065-02)
Works with
Needs one ofcRIO-9045, cRIO-9047, cRIO-9055, cRIO-9058, ITM Compute Pro
Edge SolutionsWired acquisition option within the Edge Platform
App briefsSpillway & Gate (per-pier drops); Rolling Mill (per-stand drops); Steam Header; Reactor Skin
Edge Compute
Where ITM Connect and iTestSystem run on site — Pro, Panel and Rail platforms.
Item 13
Model Industrial PC, touch-panel PC or cRIO-9045 based · ITM · spec source ↗
On-site compute and analytics layer for every ITM Connect application
- Measures
- Hosts ITM Connect + iTestSystem; accepts Modbus RTU (RX50), gateway Ethernet, cDAQ/cRIO channels
- Connect
- Ethernet to gateway / plant network; MQTT to AWS or Azure IoT (Cloud Connect option)
- Power
- Mains or field power
- Specs
- Browser-based ITM Connect app for node, input, sampling and alarm configuration; automated analytics and KPI extraction; Grafana dashboards
Works with
Needs one ofITM Compute Pro, ITM Compute Panel, ITM Compute Rail, ITM Compute Rail, cRIO-9045, cRIO-9047, cRIO-9055, cRIO-9058
Edge SolutionsCompute layer for all packaged solutions
App briefsAll app briefs
Item 24
Model Neousys POC-700 (POC-712 Atom x7425E / POC-715 Core i3-N305) · Neousys Technology · spec source ↗
Windows/x86 edge compute that runs the full iTestSystem analytics stack and hosts cDAQ chassis — the non-cRIO route to wired DAQ
- Measures
- Hosts iTestSystem + ITM Connect; accepts RX50 Modbus RTU (COM ports), cDAQ-9189 chassis over Ethernet, IX15 gateway data
- Connect
- 4x Gigabit Ethernet (PoE+ on POC-715); 4x USB 3.2 Gen2 screw-lock; COM1 RS-232/422/485 + COM2–4 RS-232 (or 1x RS-422/485); 4 DI / 4 DO isolated
- Power
- 8–35 VDC (12–35 VDC UL); DIN-rail or wall mount
- Specs
- Intel Atom x7425E (4C, 12 W) or Core i3-N305 (8C, 15 W); up to 16 GB DDR5; M.2 2280 NVMe; –25 to +70 °C fanless; 64 x 116 x 176 mm, 1.2 kg
Works with
HostscDAQ-9189, TT50, IX15 Gateway
Edge SolutionsITM Compute platform for ITM Connect
App briefsRolling Mill; Spillway & Gate; any brief with cDAQ drops or multiple RX50s
Item 25
Model EDATEC ED-HMI3120-101C-10832-4US-S · EDATEC (EDA Technology) · spec source ↗
Operator-facing panel compute: local torque / load display and ITM Connect configuration at the machine
- Measures
- Hosts ITM Connect browser app + local dashboard; accepts RX50 Modbus RTU on isolated RS-485; IX15 gateway over Ethernet
- Connect
- 1x Gigabit + 1x 10/100 Ethernet; 2x isolated RS-485 + 2x isolated RS-232; 2x USB 2.0; HDMI; optional Wi-Fi/BT; 4G LTE North-America module (-4US)
- Power
- 9–36 VDC; panel (front) mount or VESA 75
- Specs
- Broadcom BCM2712 quad-core Cortex-A76 @ 2.4 GHz (CM5); 8 GB LPDDR4 / 32 GB eMMC (-10832); 10.1" 1280×800 capacitive touch, 400 cd/m², IP65 front; –20 to +50 °C; Linux
Works with
HostsTT50, IX15 Gateway
Edge SolutionsITM Compute platform for ITM Connect
App briefsChip Meter; Agitator; Scraper; Workboat (wheelhouse display)
Item 26
Model EDATEC ED-IPC3632 · EDATEC (EDA Technology) · spec source ↗
Headless cabinet-mount compute for single-machine ITM Connect installs with discrete I/O (proximity switch, alarm relay)
- Measures
- Hosts ITM Connect; accepts RX50 Modbus RTU on isolated RS-485; 8 DI / 8 DO for proximity switch / alarm contacts; IX15 gateway over Ethernet
- Connect
- 1x Gigabit + 1x 10/100 Ethernet; 2x RS-485 + 2x RS-232 (isolated); 2x CAN 2.0B (3 kV isolated); 8 DI + 8 DO (5 kV isolated); 2x USB 2.0; HDMI 2.0; optional Wi-Fi/BT and 4G LTE
- Power
- 9–36 VDC, 24 W max; DIN-rail mount
- Specs
- Broadcom BCM2712 quad-core Cortex-A76 @ 2.4 GHz (CM5); 2–16 GB LPDDR4; 16–64 GB eMMC + µSD + optional M.2 NVMe; –25 to +60 °C; 143 x 100 x 55 mm; Linux
Works with
HostsTT50, IX15 Gateway
Edge SolutionsITM Compute platform for ITM Connect
App briefsChip Meter; Agitator (blade ID prox switch); Scraper; Lime Kiln
Item 27
Model Revolution Pi RevPi Connect 5 · KUNBUS GmbH · spec source ↗
Control-cabinet edge node where PLC-standard certification and modular DIO/AIO expansion matter
- Measures
- Hosts ITM Connect; optional RS-485 (RX50 Modbus RTU) and CAN FD; PiBridge expansion to RevPi DIO / AIO modules
- Connect
- 2x Gigabit Ethernet (PCIe, low latency); 2x USB-A 3.2 Gen1; micro-HDMI; optional RS-485 (4-pin terminal); optional 2x CAN FD; optional Wi-Fi/BT; 2x PiBridge for I/O and gateway modules
- Power
- 24 VDC industrial supply; DIN-rail mount
- Specs
- Raspberry Pi CM5 quad-core Cortex-A76 @ 2.4 GHz; 4 or 8 GB LPDDR4X; 32 GB eMMC; –25 to +55 °C; EN 61131-2 PLC standard, IEC 61000-6-2/-4 EMC; Raspberry Pi OS (optional RT kernel)
Works with
HostsTT50, IX15 Gateway
Edge SolutionsITM Compute platform for ITM Connect
App briefsSpillway & Gate (gatehouse); Hydro Turbine; Lime Kiln; general ITM Connect Rail option
C Series I/O Modules
Plug-in input modules for any cRIO or cDAQ chassis — strain, vibration and 4–20 mA process signals.
Item 18
Model NI-9237 · NI (Emerson) · spec source ↗
Wired strain-gauge and load-cell acquisition where the wireless strain node duty cycle is too slow
- Measures
- 4 differential bridge channels; quarter / half / full bridge (±25 mV/V); load cells, torque flanges, pressure transducers
- Connect
- C Series slot (cDAQ or cRIO chassis); RJ50 (779521-01) or D-SUB 37 (780264-01/-02) connector variants
- Power
- Chassis powered; built-in bridge excitation (external excitation via NI-9942)
- Specs
- 24-bit; 50 kS/s/ch simultaneous; 60 VDC ch-to-earth isolation, 1,000 Vrms transient; –40 to +70 °C; no internal bridge completion — quarter / half bridge need NI-9944 / NI-9945 accessories
Edge SolutionsWired channel option for cRIO / cDAQ-based solutions
App briefsSpillway & Gate (wired arms); Hanger Rod deposit mass; Steam Header; Hydro Turbine
Item 19
Model NI-9236 · NI (Emerson) · spec source ↗
High channel-count structural strain mapping (many gauges per chassis) on gates, hanger rods, piping and vessel shells
- Measures
- 8 differential quarter-bridge channels (350 Ω); bonded strain gauges
- Connect
- C Series slot (cDAQ or cRIO chassis); 34-position spring terminal
- Power
- Chassis powered; built-in voltage excitation and quarter-bridge completion
- Specs
- 24-bit; 10 kS/s/ch simultaneous; 60 VDC ch-to-earth isolation, 1,000 Vrms transient; –40 to +70 °C
Edge SolutionsWired channel option for cRIO / cDAQ-based solutions
App briefsSpillway & Gate; Hanger Rod; Steam Header / Piping Stress; Reactor Skin
Item 20
Model NI-9234 · NI (Emerson) · spec source ↗
Wired high-rate vibration / order analysis on gearboxes, bearings and mill drives
- Measures
- 4 differential ±5 V channels; IEPE accelerometers (2 mA), microphones, tachometers; TEDS
- Connect
- C Series slot (cDAQ or cRIO chassis); 4x BNC
- Power
- Chassis powered; IEPE excitation on-board
- Specs
- 24-bit, 97 dBFS dynamic range; 51.2 kS/s/ch simultaneous; software AC/DC coupling; anti-alias filters; –40 to +70 °C
Edge SolutionsWired channel option for cRIO / cDAQ-based solutions
App briefsRolling Mill; Marine Propulsion (Phase 2); SAG Mill; Lime Kiln drive; Chip Meter order analysis
Item 21
Model NI-9230 · NI (Emerson) · spec source ↗
Economy vibration / proximity-probe input for low-speed machinery and keyphasor / tach channels
- Measures
- 3 differential ±30 V channels; IEPE (4 mA) with open/short detection; accelerometers, tachometers, proximity probes
- Connect
- C Series slot (cDAQ or cRIO chassis); BNC, screw-terminal or snap-in variants
- Power
- Chassis powered; IEPE excitation on-board
- Specs
- 24-bit; 12.8 kS/s/ch simultaneous; AC/DC coupling; auto anti-alias filters; –40 to +70 °C
Edge SolutionsWired channel option for cRIO / cDAQ-based solutions
App briefsAgitator; Digester Scraper; Hydro Turbine (low-speed shafts); Lime Kiln
Item 22
Model NI-9232 · NI (Emerson) · spec source ↗
Highest-bandwidth vibration input for gear-mesh and bearing-defect frequencies on high-speed drives
- Measures
- 3 differential ±30 V channels; IEPE (4 mA) with open/short detection; accelerometers, tachometers, proximity probes; TEDS
- Connect
- C Series slot (cDAQ or cRIO chassis); BNC, screw-terminal or snap-in variants
- Power
- Chassis powered; IEPE excitation on-board
- Specs
- 24-bit; 102.4 kS/s/ch simultaneous; AC/DC coupling; anti-alias filters; –40 to +70 °C
Edge SolutionsWired channel option for cRIO / cDAQ-based solutions
App briefsRolling Mill; Marine Propulsion; SAG Mill
Item 23
Model NI-9208 · NI (Emerson) · spec source ↗
Brings plant 4–20 mA context signals (hoist pressure, reservoir level, gate position, motor current, flow) into the same time base as torque / strain
- Measures
- 16 single-ended ±20 mA channels; 4–20 mA process transmitters (pressure, level, position, motor current)
- Connect
- C Series slot (cDAQ or cRIO chassis); D-SUB or spring-terminal variants
- Power
- Chassis powered (loop power supplied externally)
- Specs
- 24-bit; 500 S/s aggregate; high-resolution mode with 50/60 Hz rejection; 60 VDC or 250 Vrms ch-to-earth isolation by variant; –40 to +70 °C
Edge SolutionsWired channel option for cRIO / cDAQ-based solutions
App briefsSpillway & Gate; Rolling Mill (motor current); CFB Bed Inventory; Fired Heater; Steam Header