This author has not written his bio yet.
But we are proud to say that Mark Yeager contributed 114 entries already.
Suspended in a harness 30 feet above a concrete spillway in central North Dakota, ITM engineer Ryan “RJ” Matthews instruments the gate of one of the world’s largest earthen dams with dozens of strain gauge sensors. Integrated Test & Measurement’s field service technicians and engineers have installed strain gauges on civil structures and machinery around the globe […]
This video shows how to install a strain gauge on a curved surface using M-Bond AE-10 two part epoxy.
The NI-9218 Module is a 51.2kHz, 24bit, 2-Channel C Series universal analog input module. It provides versatility when developing test plans because it is compatible with accelerometers, powered sensors, full-bridge sensors, voltage and current measurements, and quarter, half, and full bridge strain gauges. Our test engineers use this data collection module in rugged measurement system […]
ITM delivers mobile data acquisition solutions to capture real-time feedback under actual conditions Whether we are testing a new component on a truck that’s a thousand miles away or putting an off-highway vehicle through its paces right in front of us, it’s our mobile data acquisition products that often lead to ITM’s successes. How have […]
MultiDAQ is a configurable general data logging and real-time data viewing application for iTestSystem (iTS). An intuitive user interface allows test technicians and engineers to choose sensor channels, synchronize DAQ hardware, change sample rates, setup input data filters, configure data file triggering, and manage automated data file naming. Once configured, MultiDAQ provides graphical, tabular, […]
cRIO controllers allow our engineers deploy systems that used complex algorithms…
iTestSystem’s Archive Manager application simplifies DAQ system data file management…
When measuring noise and vibration levels, our engineers use the NI-9231 sound and vibration module, a CompactDAQ chassis and a Laptop running iTestSystem for data logging and analysis. The NI-9231 module is an updated, higher channel count version of the NI-9234 module. The NI-9231 is an 8 channel, 51.2 kS/s/channel, -5 V to 5 V, C Series Input Module with […]
Engine manufacturing vibration health monitoring, high-speed acquisition and analysis architecture scales up to 100 test cells.
One solution for monitoring steam tube temperature/s located inside its utility boiler to make sure start-up conditions were met.
ITM | Integrated Test + Measurement
227 Water Street, Suite 300
Milford, OH 45150
Phone: 1.844.TestSys
Fax: 513.248.8453
Email: ITM Sales
ITM provides software development, structural and mechanical testing services, industrial monitoring, strain gauging, and data analysis solutions to clients on six continents. ITM is a recognized National Instruments Gold Alliance Partner.
