The FieldDAQ™ FD-11634 sound and vibration input module from National Instruments (NI) can now be used with the latest version of iTestSystem for your data collection needs. The FD-11634 is similar to the NI-9234, NI-9232, NI-9231, and NI-9230 cDAQ dynamic input modules and can be used with IEPE type sensors such as accelerometers and microphones. Like the other FieldDAQ™ modules, this module is IP65/IP67 dust and water resistant with an operating temperature range of -40 °C to 85 °C. Our test engineers would use these modules for collecting vibration data on mining and construction equipment, vibration data on rotating machinery within manufacturing facilities and test cells, and acoustic data for measuring equipment noise emissions. No matter your need, data logging with this equipment is sure to impress.
The FieldDAQ™ FD-11634 module has 8 simultaneous sampled, ±1V or ±10 V, 24-bit differential input channels with AC/DC coupling. It has a maximum sample rate of 102.4kS/s and features built in anti-aliasing filters that automatically adjust to the sampling rate.
For advice about using the FieldDAQ™ FD-11634 sound and vibration modules in iTestSystem monitoring applications or with custom cRIO RT and FPGA control applications contact Mark Yeager or Chase Petzinger.
Click Here to view a video showing one of our test engineer collecting data from a submerged FieldDAQ™ module with iTestSystem.
Click Here for more information about iTestSystem.
Need rugged sound and vibration measurements in the field? Talk to the engineers who use this hardware daily.
Related solutions
Data Acquisition
Rugged FieldDAQ and CompactDAQ hardware selection and system integration for sound and vibration measurement. Explore →
Sensing Services
Accelerometer and microphone selection and sensor integration for noise and vibration testing. Explore →
iTestSystem Software
The data logging and analysis platform our engineers pair with FieldDAQ modules in the field. Explore →
Recent insights
-
Precision Cable Harness Fabrication at ITM — Milford, Ohio
How ITM’s people and engineering depth deliver aerospace-grade harness quality, faster and more efficiently. Test System Harnesses, Engineered End-to-End Test system cable harnesses are the connective tissue between a test article and the data acquisition system that records it — strain gauge lead wires, sensor cabling, signal-conditioner runs, and DAQ interconnects. Whether the article is…
-
AWS IoT Analytics, cDAQ-9189, Channel Synchronization, CompactDAQ, Condition-Based Maintenance, Edge-to-Cloud High-Channel Datalogging, Engineering, Instrumentation, iTestSystem, iTestSystem Automated Analytics, iTestSystem Notification Service, NI-9236, NI-9469, Strain, Stress, structural health monitoringHigh Channel Count Synchronous Datalogging
When a manufacturer needed to validate the structural performance of a 38-ton on-highway vehicle, ITM deployed a 200+ channel synchronous datalogging system capable of capturing accelerometer, strain, GPS, and speed data at nearly 2 kS/s per channel…
-
120 ohm strain gage, Instrumentation, iTestSystem, NI-9237, strain gauge, Strain Gauge Installation ServiceA Look Back and Forward at 120-ohm Strain Gauges
Here at Integrated Test & Measurement, we love diving into the nuts and bolts of how things work. While setting up a project using 120-ohm strain gages with the NI-9237 module, I found myself reflecting on the history and technical reasons why 120 ohms became the original standard for strain gages. As it turns out,…