As a part the ITM Live Demo series, we’re excited to release this video featuring iTestSystem and National Instruments FieldDAQ™ hardware to assist with your data collection projects.
At ITM, we’re always on the lookout for tools that will help us take tough measurements. When we heard that NI was introducing a new device that features IP65/67-rated ingress protection, we were very excited. In many industrial or off-way environments, there is potential for fluids to splash or leak onto exposed hardware. Could the NI FieldDAQ™ be a solution for these types of environments?
Watch now as I demonstrate how to use an NI FieldDAQ™ Strain Device with iTestSystem for data logging and answer the question; Will it work while submerged in water?
If you’re interested in learning more about iTestSystem or FieldDAQ™, feel free to contact one of our test specialists by e-mail at info@itestsystem.com or phone at (844) 837-8797.
Need rugged, field-ready data acquisition? Talk to the engineers who deploy it.
Related solutions
Data Acquisition
NI CompactDAQ and FieldDAQ hardware selected and configured for your channels, sensors, and environment. Explore →
iTestSystem Software
The acquisition, logging, and analysis platform that drives FieldDAQ and cDAQ measurements. Explore →
Rugged Systems
Custom rugged measurement systems built to survive splash, submersion, and abusive field conditions. Explore →
Recent insights
-
Precision Cable Harness Fabrication at ITM — Milford, Ohio
How ITM’s people and engineering depth deliver aerospace-grade harness quality, faster and more efficiently. Test System Harnesses, Engineered End-to-End Test system cable harnesses are the connective tissue between a test article and the data acquisition system that records it — strain gauge lead wires, sensor cabling, signal-conditioner runs, and DAQ interconnects. Whether the article is…
-
AWS IoT Analytics, cDAQ-9189, Channel Synchronization, CompactDAQ, Condition-Based Maintenance, Edge-to-Cloud High-Channel Datalogging, Engineering, Instrumentation, iTestSystem, iTestSystem Automated Analytics, iTestSystem Notification Service, NI-9236, NI-9469, Strain, Stress, structural health monitoringHigh Channel Count Synchronous Datalogging
When a manufacturer needed to validate the structural performance of a 38-ton on-highway vehicle, ITM deployed a 200+ channel synchronous datalogging system capable of capturing accelerometer, strain, GPS, and speed data at nearly 2 kS/s per channel…
-
120 ohm strain gage, Instrumentation, iTestSystem, NI-9237, strain gauge, Strain Gauge Installation ServiceA Look Back and Forward at 120-ohm Strain Gauges
Here at Integrated Test & Measurement, we love diving into the nuts and bolts of how things work. While setting up a project using 120-ohm strain gages with the NI-9237 module, I found myself reflecting on the history and technical reasons why 120 ohms became the original standard for strain gages. As it turns out,…