We are excited to announce that the NI-9205 general purpose analog input module can now be used with iTestSystem and NI CompactDAQ. Adding this module allows engineers to expand the use of iTestSystem from structural testing and analysis where signal phase relationship is important, into data logging where phase isn’t as high a priority. The NI-9205 features 32 single-ended or 16 differential analog inputs, 16-bit resolution, and a maximum sampling rate of 250 kS/s.
Our customers really wanted this module added and I can see why. If the NI-9205 module is combined with iTestSystem’s free feature set, they could build a flexible and cost effective data logger. With the extended feature set of iTestSystem, they could also build a standalone logger, with triggering and CAN support.
For more information, visit our iTestSystem software page.
Need help spec’ing a data acquisition module for your next test? Talk to the engineers who use this hardware daily.
Related solutions
Data Acquisition
DAQ hardware selection and CompactDAQ system integration for voltage, current, and sensor measurements. Explore →
iTestSystem Software
The acquisition and analysis platform that turns the NI-9205’s raw signals into a flexible, cost-effective data logger. Explore →
Testing Services
Full-service structural testing, data logging, and analysis built around the right instrumentation for the job. Explore →
Recent insights
-
Precision Cable Harness Fabrication at ITM — Milford, Ohio
How ITM’s people and engineering depth deliver aerospace-grade harness quality, faster and more efficiently. Test System Harnesses, Engineered End-to-End Test system cable harnesses are the connective tissue between a test article and the data acquisition system that records it — strain gauge lead wires, sensor cabling, signal-conditioner runs, and DAQ interconnects. Whether the article is…
-
AWS IoT Analytics, cDAQ-9189, Channel Synchronization, CompactDAQ, Condition-Based Maintenance, Edge-to-Cloud High-Channel Datalogging, Engineering, Instrumentation, iTestSystem, iTestSystem Automated Analytics, iTestSystem Notification Service, NI-9236, NI-9469, Strain, Stress, structural health monitoringHigh Channel Count Synchronous Datalogging
When a manufacturer needed to validate the structural performance of a 38-ton on-highway vehicle, ITM deployed a 200+ channel synchronous datalogging system capable of capturing accelerometer, strain, GPS, and speed data at nearly 2 kS/s per channel…
-
120 ohm strain gage, Instrumentation, iTestSystem, NI-9237, strain gauge, Strain Gauge Installation ServiceA Look Back and Forward at 120-ohm Strain Gauges
Here at Integrated Test & Measurement, we love diving into the nuts and bolts of how things work. While setting up a project using 120-ohm strain gages with the NI-9237 module, I found myself reflecting on the history and technical reasons why 120 ohms became the original standard for strain gages. As it turns out,…