We are pleased to announce that the NI-9217 resistance temperature detector (RTD) analog input module can now be used with iTestSystem and NI CompactDAQ. The NI-9217 features 4 analog inputs, 24-bit resolution, and an aggregate sampling rate of 5 S/s (1.25 S/s per channel) in high accuracy mode. The high accuracy mode has built in 50/60 Hz noise rejection and less than a 1 °C accuracy error over its entire operating temperature range.
Tip: Since the NI-9217 is the first CompactDAQ RTD module on the compatibility list, a new RTD channel type was added to iTestSystem. Right click on Channels in the project tree and select Create New > RTD.
For more information, visit our iTestSystem software page.
Need help spec’ing a data acquisition module for your next test? Talk to the engineers who use this hardware daily.
Related solutions
Data Acquisition
DAQ hardware selection and CompactDAQ system integration for RTD, thermocouple, and mixed-signal measurements. Explore →
Sensing Services
RTD and temperature sensor selection and integration for accurate thermal measurements. Explore →
iTestSystem Software
The acquisition and analysis platform whose new RTD channel type makes the NI-9217 plug-and-play. Explore →
Recent insights
-
Precision Cable Harness Fabrication at ITM — Milford, Ohio
How ITM’s people and engineering depth deliver aerospace-grade harness quality, faster and more efficiently. Test System Harnesses, Engineered End-to-End Test system cable harnesses are the connective tissue between a test article and the data acquisition system that records it — strain gauge lead wires, sensor cabling, signal-conditioner runs, and DAQ interconnects. Whether the article is…
-
AWS IoT Analytics, cDAQ-9189, Channel Synchronization, CompactDAQ, Condition-Based Maintenance, Edge-to-Cloud High-Channel Datalogging, Engineering, Instrumentation, iTestSystem, iTestSystem Automated Analytics, iTestSystem Notification Service, NI-9236, NI-9469, Strain, Stress, structural health monitoringHigh Channel Count Synchronous Datalogging
When a manufacturer needed to validate the structural performance of a 38-ton on-highway vehicle, ITM deployed a 200+ channel synchronous datalogging system capable of capturing accelerometer, strain, GPS, and speed data at nearly 2 kS/s per channel…
-
120 ohm strain gage, Instrumentation, iTestSystem, NI-9237, strain gauge, Strain Gauge Installation ServiceA Look Back and Forward at 120-ohm Strain Gauges
Here at Integrated Test & Measurement, we love diving into the nuts and bolts of how things work. While setting up a project using 120-ohm strain gages with the NI-9237 module, I found myself reflecting on the history and technical reasons why 120 ohms became the original standard for strain gages. As it turns out,…