Edge Solutions

Packaged Edge Solutions — Turnkey Monitoring Applications

“Turnkey monitoring applications, ready to deploy.”

Grouped three ways: the Boiler Suite (five systems, one roadmap), Machine & Fleet, and Structures & Inventory.

Boiler Suite

CleanPass — Recovery Boiler Fouling & Sootblower Performance

CleanPass — Recovery Boiler Fouling & Sootblower Performance

See where the boiler is fouling — and whether every sootblower pass is cleaning it.

HALT — Hopper Ash Level & Temperature

HALT — Hopper Ash Level & Temperature

Catch the ash bridge forming — before someone has to open the hopper to find it.

SHOP — SuperHeater Overheat Protection

SHOP — SuperHeater Overheat Protection

Startup protection for the most expensive tubes in the boiler.

CDS — Clinker Detection System

CDS — Clinker Detection System

Hear the clinkers fall — quantify fouling shedding before it damages the floor.

BTM — Boiler Thermocouple Monitoring

BTM — Boiler Thermocouple Monitoring

128 channels of tube-temperature truth in a NEMA4X box.

Machine & Fleet

Genset Vibration Monitoring (VMS)

Genset Vibration Monitoring (VMS)

ISO 8528-9 compliance and early-warning vibration health for every genset in the fleet.

Torque Monitoring — TT50 + ITM Connect

Torque Monitoring — TT50 + ITM Connect

Instrument the spinning shaft in place — from shaft to cloud without a teardown.

Workboat Shaft Power Meter — TT50 + ITM Connect

Workboat Shaft Power Meter — TT50 + ITM Connect

From shaft torque to fleet insight, without a teardown — measured shaft horsepower, port and starboard.

Rolling Mill Torque Monitoring — TT50 + ITM Connect

Rolling Mill Torque Monitoring — TT50 + ITM Connect

Every slab entry captured at the spindle — torque amplification, peak and reverse torque for each pass.

Structures & Inventory

Silo Weight Monitoring

Silo Weight Monitoring

The silo structure becomes the scale — inventory by load, immune to dust and bridging.

SLM — Structural Load Monitoring

SLM — Structural Load Monitoring

Continuous load visibility on the structures you can least afford to lose.

Next step: see how they’re built.

Talk to an engineer: (844) 837-8797 · info@iTestSystem.com

Related Edge Solutions resources