Home > Resources > Instrumentation > Page 4
When making strain measurements it is important to perform a shunt calibration both before and after the actual measurements are acquired. Shunt calibrations ensure accurate strain measurements by adjusting the sensitivity or gain of the data acquisition equipment to compensate for leadwire resistance and other scaling errors. iTestSystem…
The NI-9202 Voltage Input Module can now be used with the latest version of iTestSystem (16.1). The NI-9202 has excellent flexibility to meet the needs of your applications. The module has 16 simultaneous sampled, +-10 V, 24-bit differential input channels for creating large, distributed systems in a rugged…
The NI-9242 single ended voltage input module can now be used with the latest version of iTestSystem (16.1). The NI-9242 C-Series module features three (3) voltage inputs plus one (1) neutral input, 24-bit resolution, 250V rms L-N, 400V rms L-L, and 50 kS/s/ch. The measurement range (250V rms…
In the latest release of iTestSystem (v 16.1), we are adding the NI-9246 current input module to the compatibility list. The NI-9246 features 3, 22 Arms continuous current inputs, 24-bit resolution, and 50 kS/s/ch in the C Series form factor. The measurement range (22 Arms) makes it ideal…
The latest video in the ITM Live Demo series shows the new sound level measurement capability of iTestSystem. In recent months, our customers have asked us to integrate sound level measurements into iTestSystem. With this new feature, iTestSystem can help you monitor construction site noise or measure whether…
As a part the ITM Live Demo series, we’re excited to release this video featuring iTestSystem and National Instruments FieldDAQ™ hardware to assist with your data collection projects. At ITM, we’re always on the lookout for tools that will help us take tough measurements. When we heard that…
We are pleased to announce that the NI-9203 current input module can now be used with iTestSystem and NI CompactDAQ. The NI-9203 features 8 current inputs, 16-bit resolution, +/- 20 mA range, 200 kS/s maximum sample rate in the C Series form factor. This module is intended for…
We are pleased to announce that the NI-9244 single ended voltage input module can now be used with iTestSystem and NI CompactDAQ. The NI-9244 features 3 voltage inputs plus 1 neutral input, 24-bit resolution, 400 Vrms L-N, 800 Vrms L-L, 50 kS/s/ch, in the C Series form factor….
A CASE STUDY of Marquette University’s Engineering Hall Monitoring System
We are pleased to announce that the NI-9217 resistance temperature detector (RTD) analog input module can now be used with iTestSystem and NI CompactDAQ. The NI-9217 features 4 analog inputs, 24-bit resolution, and an aggregate sampling rate of 5 S/s (1.25 S/s per channel) in high accuracy mode….
We are excited to announce that the NI-9205 general purpose analog input module can now be used with iTestSystem and NI CompactDAQ. Adding this module allows engineers to expand the use of iTestSystem from structural testing and analysis where signal phase relationship is important, into data logging where…
Whether you are diagnosing a mechanical failure in anything from trucks to trains or elevators to excavators, it seems vibration is often the key to tracking down the root cause. At ITM, we have customized a Vibration Test Kit that is helping our clients isolate vibration levels no…
Tell us what you need to measure and an ITM engineer will follow up.