ITMÂ Helps Rail Line Get on Track
The Challenge
Concerned with the structural integrity of hundreds of aging passenger railcars, one of the nationâs busiest rapidâtransit systems turned to ITM for answers.
The Solution
Obvious signs of fatigue â cracks at the corners of the railcar doors â had begun to surface on the Washington Metropolitan Area Transit Authoritiesâ 1000 Series railcars, a model that dates back to the earlyâ70âs and represented roughly a quarter of WMATAâs fleet. The challenges ahead for the public transit system were to repair the cracked areas then validate the integrity of the repairs. Seeking an engineering firm that could quickly validate the integrity of the repaired railcars, government consulting firm Booz Allen Hamilton (BAH) brought in engineers from Integrated Test & Measurement (ITM), a National Instruments Gold Alliance Partner, from Milford, Ohio. ITM delivered. According to their findings, the welded areas of the railcars passed loading requirements and structuralâintegrity tests, and WMATA could then deploy the vehicles back into their busy revenue fleet.
To come to that conclusion, ITM sent a pair of engineers to WMATAâs Washington, DC, facility where they instrumented one of the aging railcars with strain gauges and accelerometers, put it through a series of load tests and collected data for analysis.
âEverything that we asked for from ITM, we got,â said Paul Lorek, who oversaw the railcar consultation for BAH and is now a lead vehicle engineer with spinoff CH2M Hill. âWhen we are trying out a new vendor, there is always a bit of apprehension as to whether or not they are going to perform. But that was quickly dispelled once they got on the scene. ITM really demonstrated a high degree of competence.â
Lorek turned to ITM because of their competitive bid and what he termed their âcradleâ toâgraveâ approach. Since its founding in 2001, ITM has prided itself on the firmâs bootsâonâtheâground delivery of engineering solutions.
âWhere we separate ourselves from our competitors is that we do it all,â said Ryan Welker, who led the railcar study for ITM. âWe provide not only the hardware, proprietary software and sensors; but we also provide the manpower to get out there and collect the data, then do the analysis.â
The backbone for ITMâs analysis in such cases is the firmâs iTestSystem software (iTS), which they developed to capture and analyze data in real time so engineers can identify and solve design and operational problems.
While in DC, Welker and his colleague performed not only a static (inâtheâgarage) test on the railcar but also a dynamic (downâtheâtracks) test. The goal of both methods was to measure the loads that were being experienced during a normal service route through the city.
During the first test, they affixed 23 strain gauges on a stationary railcar in WMATAâs garage, where the unit was tested both empty and loaded with enough 5âgallon buckets of sand to equal 26,000 pounds. In search of stress points, the engineers had the corners of the railcar jacked up and down to simulate a twisting motion. Not surprisingly, the test revealed the highest strain levels at the lower corners of the doors, the same area known to experience cracking in the 1000 Series units.
For the dynamic test, the field engineers added accelerometers to the railcar, and then gathered data while riding along for hours during a âliveâ run down two of WMATAâs most popular revenue lines.
âWeâd stop at the station, and passengers would get on the adjacent cars,â said Welker. âIt is kind of funny all the strange looks people will give you when you are riding around with a computer on a railcar with a bunch of buckets of sand.â
While the test may have appeared a bit odd to onlookers, the engineers were able to deliver sound results as their findings again affirmed that the highest points of stress occurred at the bottom corners of the doors.
With all the data in hand, ITM delivered a detailed report of findings to BAH, which allowed WMATA to make a more informed decision on when it would need to retire its oldest railcars.
âThe customer didnât have the resources, manpower and equipment to collect the data,â said Welker. âWe were able to satisfy what they were looking for in a timely manner.â
Author Information: For more information on this Case Study, contact:Â Ryan Welker â Integrated Test & Measurement (ITM), LLC â ryan.welker@iTestSystem.com