Aerospace | Defense
The Aerospace | Defense category contains Case studies and blogs related to aerospace and defense services.
ITM Engineers Strain Gauge in Shadow of Artemis I Rocket Launch
Engineers Test Artemis I Spacecraft Orion at Johnson Space Center
ITM strain gauge team witnesses powerful forces during two-week trip to Cape Canaveral
A group of engineers and aerospace engineering technicians from Integrated Test & Measurement just returned after an unforgettable experience in Cape Canaveral.
ITMâs team was there to assist an aerospace engineering partner with on-site strain gauging. The challenge was to assist in validating rocket components ahead of an upcoming launch, which required completing a massive strain gauge instrumentation project.
ITMâs team was there to assist an aerospace engineering partner with on-site strain gauging. The challenge was to assist in validating rocket components ahead of an upcoming launch, which required completing a massive strain gauge instrumentation project.
The teamâs work was delayed due to Hurricane Nicole, so they waited out the storm just blocks from the beach, said Ryan âRJâ Matthews, ITM engineer. As powerful as it was seeing a storm with wind speeds exceeding 130 mph, the hurricane was still a distant second in the most memorable department to their up-close view of NASAâs Artemis I mission rocket launch.
Matthews said the team took a break from strain gauging a rocket booster, an intense project that required a significant amount of cable routing, to observe the launch from just a few miles away.
To accommodate their partner, ITMâs crew worked eight 12-hour shifts from 5 p.m. to 5 a.m., so perfect timing to watch NASA take a first step toward blazing a path back to the Moon in the early hours of Nov. 16.
About 45 minutes after the anticipated launch time, fireball from the SLS Rocket lit up the night sky.
Artemis I SLS Rocket Launch Time Lapse
âIt was incredible,â said Matthews, who witnessed the launch from a balcony. âIt was super bright â kind of like a 1-minute sunrise. About 40 seconds later, it started rattling the building.â
Contact us for more information about our aerospace, strain gauging and testing services.
ITM connects with future engineers at UC Career Fair
ITM connects with future engineers at UC Career FairÂ
Mixed among the buzz of voices inside the massive six-court gymnasium at the University of Cincinnati Technical Career Fair this week, ITM connected with a ton of impressive engineering students.Â
Potential full-time employees and co-op students heard for the first time about our engineering firm in Milford, Ohio. It is always a joy to watch their eyes light up as we share the projects our team has the opportunity to deploy across the country and around the world.Â
The aerospace students hear that we work on rockets. The mechanical engineering students learn of the rugged measurements we collect on massive machinery. And the computer programmers discover that weâve spun up our own software products.Â
The reaction is almost always the same: âWow! I had no idea.â Â
For our team, the day is equally as fulfilling as we connect with the next generation of engineers eager to get to work and apply their knowledge.Â
Our firm is interested in filling full-time roles for students graduating with a degree in mechanical engineering, mechanical engineering technology, electrical engineering, electrical engineering technology and aerospace engineering.Â
Are you a current student or recent graduate who loves adventure, travel and has an entrepreneurial spirit? Discover a culture driven by innovation at ITM. Check out our job postings or fill out our co-op questionnaire (/jobs/).Â
Come Visit our Booth at the UC Career Fair
Looking for a new career? Come visit us at the University of Cincinnati Career Fair!
Where: UC Rec Center, Booth G18
When: Sept. 15th, 2022Â –Â 10AM – 2 PM
For more information about available jobs, contact Josh Fishback via email: josh.fishback@itestsystem.com or phone: (844) 837-8797.
Whatâs a Co-op Experience at ITM Like?Â
University of Cincinnati Mechanical Engineering Co-op Student next to the Bearcat statue.
Check out the Q&A with a recent UC grad who gained real-world experience doing hands-on learning
Brandon Walshâs career came into focus in a powerful way during one of his co-op experiences with ITM. The 23-year-old recent University of Cincinnati graduate remembers the moment. He was watching a rocket launch from a distance while on an assignment with an ITM crew in Florida.Â
âJust watching it go up into the sky and disappear while watching a livestream and hearing updates on the rocket was pretty incredible,â he said. âIt was very neat to see. It was a good five seconds after the launch that I heard and felt the blast.âÂ
Walsh, who grew up in Fort Thomas, Kentucky, knew then that he wanted to learn all he could about aerospace. The mechanical engineering graduate is now pursuing his masterâs degree in aerospace in a joint degree program that has him splitting time between UC and the University of Bordeaux.Â
He credits his ITM experiences for helping him lock onto his dream. Walsh co-opped with ITM in the summer of 2021 and again in the summer of 2022, so we caught up with him to learn more about his adventures.
Q:What was it like when you first started at ITM?
A:I enjoyed it from the start. During the interview, they talked about all the projects they do and all the traveling. That piqued my interest. Near the end of the interview they took me down to the lab and showed me some of the projects they were working on and all the tools that they had. Being able to go out to different parts of the country to work on various projects and having a lot of in-house projects to work on really interested me.
Q:You had co-ops at a couple of larger companies before coming to ITM. How would you compare the experiences?
A:I definitely got to do a larger variety of things at ITM. At the two previous companies, I was more set in a certain department and had a certain thing Iâd do every day, every week. But at ITM I got to do a lot more hands-on stuff as well as the digital/computer side of things.
Q:What types of projects did you work on at ITM?
A: We did a lot of aerospace work, so trips to a space flight company. We worked on different rocket parts and got to see the process and talk to the engineering teams. We worked at an electric vehicle battery factory up in Michigan doing strain gauging. I got to go to West Texas to work in the oil fields on a project. It was just neat to see different parts of the country that I hadnât really seen before, too.
Q:How was it getting such a wide exposure?
A: It helped further my education and understanding of the topics and things that I was working on.
Q:What stood out from your time in the lab at ITM?
A: Just seeing how this small company was making all these very precise and nice looking panels for (a world renowned equipment company) was really impressive. I got to practice and work on my skills soldering and using a drill press and taps and other tools.Â
Q: So, a lot of helpful hands-on work?
A: Yes. Iâm definitely better at soldering now than when I started.
Q:Talk to me about the culture at ITM.
A:I enjoyed working with all the different levels of people there. It was easy to talk to all of them, and they had different amounts of knowledge and ways to relate to me. They were able to provide different pieces of advice and things that helped me along the way.
Q:Did the experience at ITM help shape where you wanted to head with your career?
A:Yeah. Definitely. It really confirmed that I want to go into aerospace. I hope to work in the field of aircraft or spacecraft.Â
Q:So seeing a rocket launch in person ignited something in you?
A: Yeah. That helped open my eyes.
For more information about employment or co-op opportunities contact Josh Fishback via phone: (844) 837-8797 or email: josh.fishback@itestsystem.com.
ITM Recruiting Full-Time Engineers at UCâs Fall Career Fair
ITM Recruiting Full-Time Engineers at UCâs Fall Career Fair
University of Cincinnati students have an enormous opportunity to make a career-changing connection during the Professional and Technical Career Fair on Thursday, September 15.
Integrated Test & Measurement (ITM) will host a booth during Technical Day 2 of the event at UCâs Campus Recreation Center. Interested students can find ITM representatives from 10 a.m. to 3 p.m.
Our firm is interested in filling full-time roles for students graduating with a degree in mechanical engineering, mechanical engineering technology, electrical engineering, electrical engineering technology and aerospace engineering.
In addition to seeking full-time hires, we are searching for talented students who are interested in experiencing a dynamic and fulfilling co-op opportunity where you will have a chance to learn through exciting, hands-on engineering projects around the country.
ITM is a structural test & measurement engineering service and software company in Milford, Ohio, that focuses on three vertical spaces: Industrial Monitoring, Testing Services, and our configuration based test software, iTestSystem.
ITM offers competitive compensation and benefits and a career filled with travel and new learning opportunities. ITM was founded by Tim Carlier in 2001 to help companies around the world reduce costs and improve efficiencies in their product development, manufacturing and production activities.
Interested candidates should stop by our booth inside UCâs Campus Recreation Center from10 a.m. to 3 p.m. on Thursday Sept. 15 and/or email a resume and cover letter to: josh.fishback@itestsystem.com.
Our team will also be drawing for free hats and T-shirts, so be sure to find us during the event to learn more about ITM.
Rockets, road trips and paper millsÂ
Why an ITM team trekked across Alabama several times in the same weekÂ
Our team should be intimately familiar with the three-hour stretch of I-65 between Prattville and Decatur, Alabama. They drove it four times in about as many days during a recent work trip. Â
The team had been on a troubleshooting assignment to a rocket-building NASA partner that needed help with what appeared to be failing sensors. They had no idea that what seemed like a fairly straightforward trip would soon become far more interesting and logistically challenging. One phone call later though, and they were dispatched 166 miles south to a paper mill client.Â
Upon arrival, they began commissioning new Acosense technology on the plantâs process lines. Integrated Test & Measurement is an exclusive U.S. installer of the Swedish technology that can constantly monitor and analyze liquids inside a pipe with non-invasive clamp-on sensors.Â
The small crew proved themselves both flexible and adaptable by pulling double duty as they served both clients for the better part of a week. Rocket work one day. Back in the car. Paper mill the next. Back in the car. And so on until both jobs were complete. The week could serve as a microcosm of the variety of work ITM engineers balance regularly.Â
âThat was a challenging week for this crew for sure,â said ITM President Tim Carlier. âBut it was all interesting technology and gave the team a chance to troubleshoot newer equipment. So it was a good learning challenge for us and an example of our dedication to meet the needs of our clients.âÂ
ITM engineers and technicians experience a wide variety of projects and travel opportunities. For some, the real joy is working with their hands on site, while others prefer the more technical activities such as computer assisted design or relying on their social skills during customer interactions.Â
Ultimately, we do what it takes to deliver â even when that means burning up the roads in Alabama to get the job done.
For more information about our strain gauging and testing services contact Ryan Welker @ (844) 837-8797.
ITM Co-op Helps Engineering Student Set Sights Even HigherÂ
ITM Co-op Helps Engineering Student Set Sights Even HigherÂ
Tyler Houseâs dream career began to come into sharper focus during his spring co-op at Integrated Test & Measurement.
After four months at the Milford, Ohio, firm the University of Cincinnati electrical engineering student headed into his summer feeling both excited by his work experience and inspired to emulate ITM CEO Tim Carlier one day by starting his own company.
âI know I want to do something I love,â said Tyler, who had just returned from a trip to Disney with his girlfriend to celebrate the end of the semester. âIâd like to start my own company someday. Iâve been poking at that idea. Definitely a big dream of mine is having that freedom and doing something that means a lot to me.â
Perhaps the only thing that equals Tylerâs love of engineering is his love of music. He and a few fellow graduates from Clermont Northeastern (CNE) high school started a band called Wishbone, which has started lining up local gigs to cover rock and blues tunes stretching back a half century.
Tylerâs two worlds collided on the last day of his co-op when a couple of engineers from ITM dropped into his bandâs âfirst bonafide show.â
âIt was so much fun watching their reaction,â said Tyler, who employs his electrical engineering skills to repair the bandâs gear when things inevitably break. âI love that they came.â
Coincidentally, like Wishbone, ITMâs entire leadership team â the CEO, VP of Operations, Lead Programmer and Administrative Director â are all CNE graduates. For Tyler, seeing that level of success from the same small high school as him was only more of a confidence lift.
He loves the entrepreneurial and inventive culture at ITM, where staff members are constantly tackling new challenges. âItâs really just a great place to figure out what you are into,â he said.
Tyler found himself learning a ton about Fusion 360, a cloud-based 3D modeling program, while researching mechanical properties and simulating failure modes on a bolted joint. He said he spent about half his co-op in the office doing things like assembling Data Acquisition (DAQ) boxes and the other half on the road working on-site. Experiences included everything from climbing inside massive paper mills to helping gather data on equipment operating in remote locations all over the country.
âIn talking with my friends who have had co-ops, itâs hard to get to work in a place where you feel like you can make a difference and actually help fix problems,â said Tyler. âI definitely felt that. I learned really fast about how to deal with mistakes and just general problem solving.â
Besides the on-the-job learning, he loved exploring new places, national parks and more with the ITM crew after hours. Heâs hoping to pick up some work helping ITM with any projects through the summer, and heâs interested in returning during his next co-op rotation in Spring of 2023.
Meanwhile, heâll keep poking at his dream of someday owning his own company.
âYou just have to go out there and get it,â Tyler said. âIf you are aggressive about it, you will fail a bunch. But youâve got to be able to get up off the ground and just keep rolling with it.â
For more information about Co-op or employment opportunities at ITM, contact Josh Fishback via email at josh.fishback@itestsystem.com or phone at (844) 837-8797 x705.
Modern Tools Series: Whatâs In The Box?
Modern Tools Series: Whatâs In The Box?Â
This box reveal may not be quite as dramatic as the ending of âSeven,â the â95 serial killer thriller that blew moviegoersâ minds, but the ITM team is throwing open the latches nonetheless.Â
In this case, our team is taking you on a quick tour of a recently deployed Rugged Data Acquisition System. These particular black boxes of tech are riding around on high-dollar fracking equipment to remotely monitor all sorts of triggering events. Our crew builds them on the regular, and the end result is that our clients can better understand what sorts of stress, strain and vibration is taking place both en-route to their site and once operations begin. Â
ITM is known for building rugged measurement systems and data logging solutions that are deployed on everything from Class A trucks, to well frac trailers, to dam and bridge structures, oil pipelines, gensets, boilers and more.
So, without further ado, whatâs in the box? Â
We recommend a handful of essential components and elements if you are looking to build your own rugged measurement system:
- An Industrial Embedded PC. We love the Nuvo-7000LP. Another favorite is the Advantech UNO-2484G-9S55.Â
- Youâll need industrial grade connectivity, and you canât beat Peplinkâs cellular router options. And remember to outfit that unit with an AT&T or Verizon plan and get that activated card installed.Â
- A remote desktop application is a must, and we usually turn to LogMeIn for our remote access and file management. This allows us to pull up any of our units no matter where they are in the world to check in on status or grab some data for our clients.Â
- Speaking of data, depending on your job, youâll likely need lots of data storage capability. Our preference is a 2 terabyte USB drive, which gives us an almost unlimited amount of space. If needed, we can store about six months worth of data before hitting capacity.
- Since our industrial PC is running Windows, we use iTestSystem, our proprietary engineering measurement software platform that enables test engineers to organize, acquire, view, and analyze data from machinery, processes, vehicles and other complex systems.
- To complete the box, our industrial PC is connected to an NI c-DAQ outfitted with strain, vibration and voltage modules.
- What about power you ask? In our fracking instance, we connected to an alternator which charges a bank of batteries in the RAC.Â
So there you have it. Thatâs whatâs in the box. Build your own, or get in touch with our team, and weâll customize a system for your specific needs. Â
We also install and service all of our equipment. So if something breaks in the field, we can get you back up and collecting data or even assist with data analysis.
For more information about our rugged data acquisition systems, on-site system deployment or data analysis services, contact Josh Fishback via email at josh.fishback@itestsystem.com or phone at (844) 837-8797 x705.
ITM gives back to UCâs future engineers
ITM gives back to UCâs future engineers
The team at ITM spent half a day at the University of Cincinnati recently in an effort to invest in the next generation of engineers.
Integrated Test and Measurement President and Founder Tim Carlier volunteered to judge senior capstone projects developed by students in UCâs College of Engineering and Applied Science. Joining Carlier inside Great Hall of UCâs Tangeman University Center were Josh Fishback, ITMâs administrative director, and Chase Petzinger, a computer engineer with the Milford, Ohio, engineering firm.Â
A few of the projects they judged included a Mars Rover prototype, a homemade emergency rescue drone and an autonomous object avoidance system that uses lidar technology to prevent crashes.Â
As a whole, ITMâs crew left campus feeling encouraged by the impressive engineering skills, presentation styles and ingenuity of UCâs students. For Carlier, a day like this is an opportunity to connect with young people entering the industry. While he is always on the lookout for potential co-op connections or to recruit talented employees, building relationships and supporting young engineers is the main objective.Â
âThese guys and gals are going to be out in the workforce, and they will have jobs that could use our services someday,â said Carlier. âIt is exciting to see how well they are doing.âÂ
 For Fishback and Petzinger, both UC alumni and former track and field athletes, it was a chance to return to their alma mater. Â
 âIt is always good to come back and see how UC has progressed,â said Fishback, an accountant who graduated from UCâs Lindner College of Business. âI like seeing how the students carry themselves and how they present their senior design projects. I was pretty impressed.âÂ
Petzinger was excited to see his favorite professorâs name â Thomas Mantei â had been added to UCâs Engineering Research Center. He also found it helpful to learn what types of programming languages todayâs students are favoring. Â
âThey are doing a lot more web-based machine learning now than when I was on campus,â said Petzinger. âIt is pretty interesting to see the direction things are going. They knew their stuff. I didnât have a single student stumble over a technical question that I gave them.âÂ
Carlier handed out business cards to those he engaged with and invited them to connect on LinkedIn so he could follow their career achievements.
For more information about Engineering or CO-OP positions at ITM contact Josh Fishback via email at josh.fishback@itestsystem.com or phone at (844) 837-8797 x705.
ITM provides software development, structural and mechanical testing services, industrial monitoring, strain gauging, and data analysis solutions to clients on six continents. ITM is a recognized National Instruments Gold Alliance Partner.
