ITM Blog Posts

The Blog Post category contains blog posts associated with ITM’s testing services, LabVIEW programming, Test & Measurement Hardware, Boiler Monitoring Systems, and iTestSystem applications.

iTestSystem Tips: Modify Multiple Channels with Excel

in , /by

 

When building large channel count DAQ systems, easy sensor channel editing is key.  Edit multiple channels at once by using excel. Highlight the Channels item in the configuration tree. Export the channels to a CSV file. Open the CSV file in Microsoft Excel, then edit and save. Import the edited CSV file to update the configuration file with the channel changes.
For more information about iTestSystem, contact Chase Petzinger @ (844) 837-8797 x704

ITM adds NI-9203 Compatibility to iTestSystem

in , /by

We are pleased to announce that the NI-9203 current input module can now be used with iTestSystem and NI CompactDAQ.

The NI-9203 features 8 current inputs , 16-bit resolution, +/- 20 mA range, 200 kS/s maximum sample rate in the C Series form factor.  This module is intended for high-performance control and monitoring applications. The NI-9203 uses multiplexed sampling and an SAR type ADC.

For advice about using the NI-9203 versus other current modules in iTestSystem monitoring applications or with custom cRIO RT and FPGA control applications contact Mark Yeager or Chase Petzinger.

ITM Live Demo Series: Customer DAQ

in , /by

As a part of our new ITM Live Demo series, we’re excited to release this video featuring our custom data acquisition and data logging solutions. During our 17 years in business, we’ve found that every test is a little bit different, especially in ruggedized environments. The best way to account for these custom problems is to create a custom solution for data collection.

Watch now to see as I demonstrate some of the features available with a custom DAQ and explain how this may be just the solution you’re looking for.

If you’re interested in learning more about how a custom DAQ solution built by ITM can help meet your specific testing needs, feel free to contact one of our test specialists by e-mail at info@itestsystem.com or phone at (844) 837-8797.

ITM adds NI-9244 compatibility to iTestSystem

in , /by

 

We are pleased to announce that the NI-9244 single ended voltage input module can now be used with iTestSystem and NI CompactDAQ. The NI-9244 features 3 voltage inputs plus 1 neutral input, 24-bit resolution, 400 Vrms L-N, 800 Vrms L-L, 50 kS/s/ch,  in the C Series form factor.  The wide measurement range (400Vrms L-N or 800Vrms L-L) makes it ideal for high-voltage measurement applications such as phasor measurements, power metering, power quality monitoring, industrial machinery, motor testing, and transient or harmonic analysis with high-speed (50kHz) simultaneous sampling.

iTestSystem Info

For advice about using the NI-9244 in stand-a-lone power quality applications or cRIO power monitoring applications contact Mark Yeager.

Cincinnati Business Courier 2018 Innovation Award Finalist

in , /by

On April 19th ITM was recognized as a finalist for the Cincinnati Business Courier Outstanding Green Innovation award.  This award recognizes an innovative product or project with clear potential to transform overall energy and environmental performance.  ITM’s President Tim Carlier was on hand to receive the finalist award on behalf of the development team that produced the innovative Sootblower Fouling Detection (SFD) technology.

ITM’s SFD technology helps energy producers generate power more efficiently by detecting energy sapping soot buildup in power and recovery boilers.  More information about this technology is located @ iTestSystem.com/sfd.

Congratulations to all the winners and finalists and thank you to the Cincinnati Business Courier for hosting this event.

Putting a HALT to Hazardous Hopper Maintenance – Power Magazine

in , , , , /by



Check out my article “Putting a HALT to Hazardous Hopper Maintenance” in the May 2018 edition of Power Magazine.  This article describes a system for detecting dangerous plugging conditions inside ash hoppers.  Ash hoppers are used in the power industry to collect hot ash from utility boilers. – Mark Yeager

Follow the link below for the on-line version.

https://www.powermag.com/putting-a-halt-to-hazardous-hopper-maintenance

For more information about a Halt System or our other Boiler Monitoring Systems contact Ryan Welker @ (844) 837-8797 x702

 

iTestSystem: New Release

in , /by



We are excited to announce that a new version of iTestSystem is available for download.  This latest release provides engineers with a flexible measurement platform ideal for long term endurance testing, vibration analysis, off -highway vehicle condition monitoring and structural design validation.

We have added  and updated the following tools:

  • Advanced Triggering for collecting Trend Data
  • Expanded Data Acquisition Hardware Support including the NI cDAQ TSN Chassis
  • Automated Data Analysis through the Automated Analytics (A2) Tool
  • Enhanced Tools for Data Viewing & Analysis
  • New Data Management and Email Notification Services

Download the new version today!

Download Now!

For more information about the new version of iTestSystem or to request a demo contact Chase.Petzinger@iTestSystem.com.

 

Chase Petzinger – CLED

in /by

Congratulations to Chase Petzinger on obtaining the status of National Instruments Certified Embedded Systems Developer (CLED).  Chase is 1 of 51 LabVIEW developers in the United States to achieve this Certification.  Contact Chase at Chase.Petzinger@itestsystem.com for questions about your embedded development projects.

Happy Holidays – 2017

in , /by

As the new year approaches and we reflect on the past year, we are extremely grateful for your business and the relationships that we have built with you.  We are also very excited for the new year because we have some exciting new technologies that we believe will help you achieve more.  We look forward to working with you in 2018 and beyond.

Have a great Holiday Season!